IPB

Welcome Guest ( Log In | Register )

 

Outline · [ Standard ] · Linear+

 Server Help (jk2), Help me if you can, please! :P

Achilles
post Feb 27 2005, 11:59 AM
Post #1


Padawan


Group: Members
Posts: 19
Joined: 28-September 03
Member No.: 65



hey all, if any of you know how to set up a server, I got a brain twister for you!

Okay, I've done everything to try and create a server, I do have a router, I believe it's a Linksys Wired Router. I've went into my Network Place, selected properties, and went into the IP settings, and selected TCP/IP Filtering, and then opened up all ports (when I open only 28060-28090 Internet Explorer does not work, nor does my messangers)
Then I've turned off Zone Alarm, and started my server with my server.cfg file. Now, my server should show up in the list... well it still odesn't... any ideas?

Heres my Server.cfg file:


// This file is automatically executed by jk2mp.exe


seta g_motd "Welcome to The Connection"
sets "Config File" "server"
seta sv_hostname "^7|| ^7-<^1TC^7>-^1TheConnection ^7||"
sets "Admin" "Achilles"
sets "Admin E-Mail" "Achilles@theconnectionlcan.com"
sets "Location" "USA"
sets "Clan" "-<TC>-"
//seta net_port "28070"
seta sv_privatePassword ""
seta rconPassword "*******"
seta g_needpass "0"
seta g_password ""
//seta net_ip "***.***.***.***" <--- I type in my regular IP here, still nothing.
sets "Configured by the TC Clan"

seta sv_maxclients "24"
seta sv_privateClients "0"
seta sv_maxPing "0"
seta g_inactivity "360"
seta com_HunkMegs "32"
seta sv_minclients "0"
seta sv_maxRate "8000"
seta sv_minPing "0"
seta g_forcerespawn "3"
seta sv_fps "50"
seta com_zoneMegs "16"
seta com_SoundMegs "16"
seta sv_reconnectlimit "3"
seta g_warmup "0"
seta sv_zombietime "30"
seta g_maxGameClients "0"
seta g_minGameClients "0"
//Advanced Saber Begin//
seta g_saberboxtracesize "2"
seta g_saberdmgvelocityscale "0"
seta g_saberdmgdelay_idle "350"
seta g_saberdmgdelay_wound "0"
seta g_saberghoul2collision "0"
seta g_sabertracesaberfirst "0"
seta _saberalwaysboxtrace "0"
//Advanced Saber End//
seta g_gravity "800"
seta g_speed "250"
seta g_timeouttospec "70"
seta g_dismember "500"
seta g_maxForceRank "0"
seta g_ForceRegenTime "200"
seta sv_timeout "300"
seta g_maxHolocronCarry "3"
seta g_weaponrespawn "5"
seta g_allowvote "0"
seta sv_allowDownload "0"
seta sv_allowAnonymous "0"
seta g_doWarmup "0"
seta sv_floodProtect "1"
seta g_friendlyfire "0"
seta g_teamForceBalance "0"
seta g_forceBasedTeams "0"
seta sv_pure "1"
seta g_synchronousclients "0"
seta g_teamAutoJoin "0"
seta g_privateDuel "1"
seta g_adaptrespawn "0"
seta g_smoothClients "0"
seta sv_padPackets "0"
seta g_saberLocking "0"
seta g_friendlySaber "0"
seta g_forcePowerDisable "0"
seta g_jediVmerc "0"
seta g_weaponDisable "65534" // Weapons Disabled
seta g_forcePowerDisable "384" // Force Power Disabled
seta dmflags "0"
// ------------------- Additional Master Server List -------------------
seta sv_master5 ""
seta sv_master4 ""
seta sv_master3 "master0.gamespy.com"
seta sv_master2 "clanservers.net"
seta sv_master1 "masterjk2.ravensoft.com"
// --------------------------------------------------------------------

seta logfile "3"
seta g_log "games.log"
seta g_statLog "1"
seta g_statLogFile "stats.log"

seta fraglimit "0"
seta timelimit "0"
seta capturelimit "0"
seta duel_fraglimit "0"

// ZoneMegs = 16
// HunkMegs = 32
// SoundMegs = 16
// IP = ***.***.***.***
// Port = 28070

//----------------
//#### THE FOLLOWING KICKS THE SERVER INTO GEAR ####
//----------------

g_autoMapCycle "1"
//Starting map
Map ffa_bespin
exec "jediMaps.cfg"
execmod academy.cfg (Any idea on what you have to type here to exec a mod?)
//
writeconfig jk2mpconfig.cfg
wait
//EOF


--------------------
user posted image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JayBaen
post Feb 27 2005, 02:08 PM
Post #2


Lord


Group: Admin
Posts: 1,073
Joined: 13-June 03
From: Atlanta, GA
Member No.: 3



I'll give this a bit deeper of a look later ... but upon first glance, your seta net_ip and seta net_port are both "commented out" in this example (meaning they have the // before them). If they are commented out -- then they aren't being read by the engine. Make sure they are uncommented.

Also -- you shouldn't have to open up all incoming ports in the Linksys for simple browsing, etc to work -- but that's another conversation.

Let me know if uncommenting those works for you. (as a preference, I'd put your IP and Port settings in a startup .bat file and not the server.cfg -- I'd be happy to show you how, once we get past this hurdle).

JB


--------------------
Yellow Is Golden

DelphiGT

"There's nothing in this universe that can't be explained. Eventually." -- House, M.D.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Achilles
post Feb 27 2005, 07:26 PM
Post #3


Padawan


Group: Members
Posts: 19
Joined: 28-September 03
Member No.: 65



awesome I'll give it a shot later on. Thanks Jay!


--------------------
user posted image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Topic Options
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
 

Lo-Fi Version Time is now: 28th March 2024 - 01:20 PM